Fire Ant ST entry level stream flame machine Fire Ant ST mid-level stream flame machine Fire Ant compact stream flame machine Fire Ant NS flame machine specialist model for 'non-supervised' operation Fire Ant ID industrial IP rated flame machine
Fire Ant NS flame projector

The FireAnt 'NS' model is a specialist model for "Non-Supervised" operation. FireAnt-NS includes a manual pendant for firing the flame effect (complete with E-stop) and a "link" option to allow you to fire multiple FireAnts, at the same time, from one pendant. Full DMX control is also standard.

FireAnt-NS has gas-pilot ignition of the main flame effect and spark ignition of the pilot. FireAnt-NS also has full flame monitoring with automatic pilot re-ignition in the event of the flame failure coupled with a lock-out and operator reset after 3 attempts to re-light the pilot. FireAnt-NS also has internal flame height adjustment as well as a secondary external height adjustment. These two adjustments combine to allow the operator to set the maximum flame height (internal adjustment) and then use the secondary external adjuster to vary the flame height between its lowest setting and that of the primary adjustment. In this way the maximum flame height can never be exceeded.

FireAnt-NS represents a cost effective way to create single, dramatic, shots of flame. The height of the flame can be varied from 30cm to over 200cm and runs from a standard propane (LPG) gas bottle.

Fire Ant NS specs:

Availability: 6 weeks from order

Finishes Available: Stainless Steel as standard

Product Dimensions: 500mm x 500mm x 280mm

Product Weight: 14 kg

Power Requirements: 240V 50Hz 6Amp

Other Requirements: Propane (LPG) gas at maximum 4 Bar